WM2 - Wall Mounted Drinking Water Fountain - Mains Connected
Features:
- Robust construction to ensure longevity
- Highly Polished stainless steel top
- Optional stainless steel cabinets
- Adjustable, tamper proof non-squirt bubbler and glass filler
- PROUDLY AUSTRALIAN MADE
WATER RESERVOIR
A 0.5 litre tank is incorporated within the chilling chamber to meet peak
usage periods. The tank is fabricated from seamless hard drawn copper
which is tin plated for safety. The chilling capacity is 8 lph during
peak periods.
REFRIGERATION
The refrigeration system uses 170gms of R134a gas, which is nontoxic,
non-flammable and environmentally friendly. The refrigerant is controlled
by a capillary tube, which has no moving parts. The system is fitted with
a suction line to give maximum heat exchange efficiency
WATER FLOW CONTROL
The bubbler is rated to supply 1.7 litres per minute at any mains pressure
between 140 and 700kPa. An automatic, self-regulating control is fitted
to overcome varying mains pressure water.
WATER CONNECTIONS
Water inlet – 1/2” female B.S.P.
Drain Outlet – 40mm Female F.P.V.C. pipe
THERMOSTAT CONTROL
The thermostat is factory pre-set.
COMPRESSORS
1/8 h.p. capacity, 90 watts. The compressor is hermetically sealed for
silent running.
CONDENSER
The condenser is of copper tube and expanded aluminium fin.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.
Full load current is 1.06 amps.
PERFORMANCE TO ARI 1010-94 STANDARD
Water Inlet – 26.7ºC
Water Outlet – 10ºC
Ambient Air – 32.2ºC.
WEIGHT – PACKED
31kgs
DIMENSIONS – PACKED
30cm long x 30cm wide x 55cm high
WARRANTY
Twelve months comprehensive coverage.
Five years for compressor replacement
INSTALLATION NOTE
- There must be a minimum of 75mm on both sides of the cooler to facilitate
air-flow.
- With water pressure above 700kPa a pressure reduction valve should
be fitted.
For pricing or ordering information please feel free to contact
us.
|
